|  
 FREE Shipping & Handling  on orders of $75 or more.
 |  
 UL Approved Product, Non-dimmable
 
 PART NUMBER: ET-2420W
 
 INPUT FEATURES:
 
 RATED INPUT VOLTAGE: 100Vac to 240Vac
 RATED INPUT FREQUENCY: 50Hz/60Hz
 INPUT CURRENT: 2.8A max. & 100Vac.
 INRUSH CURRENT: 30A max. at 100-240Vac input for a cold start at 77F.
 EFFICIENCY: higher than 89% at 100-240Vac input and output full load (4.2A).
 
 OUTPUT FEATURES:
 
 RATED OUTPUT WATTAGE: 200 WATTS
 RATED OUTPUT VOLTAGE: 24.0VDC
 RATED OUTPUT CURRENT: 0.0A-8.4A
 SHORT-CIRCUIT OUTPUT POWER: HICCUP MODE (HICCUP(3W))
 LINE REGULATION: ≤1%
 LOAD REGULATION: ≤5%
 
 PROTECTIONS:
 
 OVER - CURRENT PROTECTION: The power supply shall be hiccupped and no damage shall occur when output current reaches to its over-current protection trigger point (set@ Max load 120-300% ). The power supply shall be self - recovery when the fault condition is removed.
 SHORT - CIRCUIT PROTECTION: The power supply shall be hiccupped(input power less than 3W) and no damage shall occur when any output operating in a short circuit condition under any line condition for an indefinite period of time. The power supply shall be self - recovery when the fault condition is removed.
 OVER - VOLTAGE PROTECTION: The power supply shall be hiccupped and no damage shall occur when output current reaches to its over- voltage protection trigger point (set@ Max output voltage 120-180%). The power supply shall be self - voltage when the fault condition is removed.
 ENVIRONMENTAL OPERATING CONDITIONS: The power supply shall be capable of operating continuously in any mode without performance deterioration in the following environmental conditions.
 NON-OPERATING: The power supply shall be capable of withstanding the following environmental conditions extended periods of time, without sustaining electrical or mechanical damage and subsequent operational deficiencies.
 Ambient Temperature: 32F ~ 104F
 Relative Humidity: 10% ~ 90%
 Ambient Temperature: -22F ~ 158F
 Relative Humidity: 10% ~ 90%
 
 
 |