FREE Shipping & Handling on orders of $75 or more. |
UL Approved Product, Non-dimmable
PART NUMBER: ET-1220W
INPUT FEATURES:
RATED INPUT VOLTAGE: 100Vac to 240Vac
RATED INPUT FREQUENCY: 50Hz/60Hz
INPUT CURRENT: 2.8A max. & 100Vac.
INRUSH CURRENT: 30A max. at 100-240Vac input for a cold start at 77F.
EFFICIENCY: higher than 87% at 100-240Vac input and output full load (4.2A).
OUTPUT FEATURES:
RATED OUTPUT WATTAGE: 200 WATTS
RATED OUTPUT VOLTAGE: 12.0VDC
RATED OUTPUT CURRENT: 0.0A-16.5A
SHORT-CIRCUIT OUTPUT POWER: HICCUP MODE (HICCUP(3W))
LINE REGULATION: ≤1%
LOAD REGULATION: ≤5%
PROTECTIONS:
OVER - CURRENT PROTECTION: The power supply shall be hiccupped and no damage shall occur when output current reaches to its over-current protection trigger point (set@ Max load 120-300% ). The power supply shall be self - recovery when the fault condition is removed.
SHORT - CIRCUIT PROTECTION: The power supply shall be hiccupped(input power less than 3W) and no damage shall occur when any output operating in a short circuit condition under any line condition for an indefinite period of time. The power supply shall be self - recovery when the fault condition is removed.
OVER - VOLTAGE PROTECTION: The power supply shall be hiccupped and no damage shall occur when output current reaches to its over- voltage protection trigger point (set@ Max output voltage 120-180%). The power supply shall be self - voltage when the fault condition is removed.
ENVIRONMENTAL OPERATING CONDITIONS: The power supply shall be capable of operating continuously in any mode without performance deterioration in the following environmental conditions.
NON-OPERATING: The power supply shall be capable of withstanding the following environmental conditions extended periods of time, without sustaining electrical or mechanical damage and subsequent operational deficiencies.
Ambient Temperature: 32F ~ 104F
Relative Humidity: 10% ~ 90%
Ambient Temperature: -22F ~ 158F
Relative Humidity: 10% ~ 90%
|